Electrical Calibrations (Laboratory)
Our Time 5051 Calibrator is used in our Laboratory to carry out Electrical Calibrations for all of your electrical equipment and testing instruments to a UKAS or traceable standard across the ranges seen in the table below.
| Generation | Resistance | 0Ω to 1GΩ |
|---|
| Measurement | Resistance | 0Ω to 100MΩ |
|---|
| Generation | DC Voltage | 0 to 1000V |
|---|
| Measurement | DC Voltage | 0 to 1000V |
|---|
| Generation | DC Current | 0 to 1000A |
|---|
| Measurement | DC Current | 0 to 3A |
|---|
| Generation | AC Voltage | 40 to 1kHz / 20mV to 1000V |
|---|
| Measurement | AC Voltage | 40 to 1 kHz / 10mV to 750V |
|---|
| Generation | AC Current | 40 to 1kHz / 10mA to 500A |
|---|
| Measurement | AC Current | 40 to 1kHz / 100mA to 3A |
|---|
In addition to accommodating Electricians with this service we are capable of offering it to the health industry, therefore taking care of all instruments and equipment that may require calibrating in your electrical department.
We can currently calibrate the following in your specified location:
It is possible for us to calibrate the following in our laboratory:
• Multimeters
• Clampmeters
• Insulation-Continuity Testers (Meggers)
• Earth Loop Impedance
• RCD Testers
• Multifunction Installation Testers (16th edition)
• Amp Meters (AC or DC)
• Power Supplies
• mA/mV Source Units
• PAT Testers
If you require electrical calibrations for Temperature Simulators, Indicators, Controllers, Recorders and Sensors these can be carried out to the following ranges:
| Noble Metal Thermocouples | 0°C to 1760°C |
|---|
| Base Metal Thermocouples | -190°C to 1370°C |
|---|
| Resistance Sensors (PT 100) | -200°C to 800°C |
|---|
Please see our UKAS Schedule for more information.
| 
